Salmo Local leaving Kettle Falls yard

Salmo Local leaving Kettle Falls yard
Showing posts with label Kettle Falls. Show all posts
Showing posts with label Kettle Falls. Show all posts

Wednesday, October 9, 2013

Progress Update #4

Hi Everyone. School and sports have really been eating my time, but I did get a few things done on the layout.

The first thing I've been working on is planning the track work, scenery, structures, etc.. I haven't actually laid any track yet because I'm waiting til the next module up so I can make sure radius' and turnouts will fit properly. Despite this, I did plan the scene. I decided to model one of the few curved wooden pile trestles along the Columbia River towards the town of Northport. My plan is to have the track snake along the river and cross the bridge and jut back out to the edge of the layout. Hopefully this will make a 'shadow box' effect to chop up the scenes. Please excuse the crude drawing!

Prototype by: Bill Hooper
Model


The next thing I did on the layout was actually start painting my backdrop. I had always been scared to even try backdrop painting, but one I just thought I should go for it. So I did! I got a few photos off of the internet and planned what I was going to do. After that I started painting. I painted the background hills and trees. The only thing left to paint is grassy, rolling hills which will in the fore-ground of the backdrop. I like the result, but it doesn't match the prototype photos as closely as I had hoped. I can always repaint it! Please give me any suggestions you might have. 

Prototype/ sorry about the quality

Model



The other thing(s) I did on the layout, was work on building a few of the structures for my locomotive facility in Kettle Falls. This included a sanding tower and a fuel tank. I could of bought these as kits from Pike stuff or Walthers, but I was striving for more of a backwoods/ branch line look. By the way, I have no prototype info about these structures in Kettle Falls, so they are completely 'proto-freelanced', since they are built after BN prototypes, just in a different location.

The sanding tower was built with styrene 'I' beams, strip wood, brass wire, and a tube that solder comes in. 

Sanding Tower:
Prototype by: Martin Duwash
Model:



For the fuel tank, I unfortunately lost the prototype photo. Anyway, the model is made from a 3/4" PVC pipe, wood for concrete pillars to enhance the appearance of layered concrete, and various other little details mainly made of sprues and old freight car parts. The weathering turned out REALLY bad in my opinion, so I still have to fix that. Once I finalize where I'm going to put the model, I'll build a concrete pad, but until then, there isn't one.


The last thing I did on the layout was add speeder tracks to my speeder shed and build a speeder from a Durango Press kit. This was a fun, yet very simple kit to build. I still have to do some touch-up paint on it, but overall it turned  out well.



So, that's about it. 

Tuesday, September 3, 2013

Progress Update #3

My Summer was really busy, so not much got done on the layout. I did work on quite a bit of details and I finished the wood chip loading spur for the Boise Cascade lumber mill in Kettle Falls. The wood chip loading facility included a heavily kitbashed loader made from a cheap model power sand mine kit and a scratchbuilt auger shed and loading pit for trucks or front end loaders to dump chips in. The details included scratchbuilt power poles, a corrugated metal fence for the grain complex, and some little details around the depot. Another thing I did was I found a new candidate for trees. I was watering our garden when I noticed our oregano plant had some extremely nice looking blossoms that could be used for deciduous trees. That only problem is that it is very fragrant!









Here's just an overview of the layout. I'm in the process of building more bench work. I'll keep you updated on that.




National Narrow Gauge Convention Update

This year's narrow gauge convention in Pasadena was great! You're probably wondering why I attended a narrow gauge venue since I'm standard gauge modern modeler. The truth is, is that those narrow gaugers have tremendous amounts of talent and skill. They are wonderful scratchbuilders, artists, and create spectacular scenery. Standard gaugers can really learn a lot from them. Anyway, I met a lot of really neat people and saw some expected amazing modeling. Just what I came for. I did enter a contest entry, but unfortunately didn't win. I have to admit, though, my competitor has some real talent!

Here's some photos of layouts and modules.

Jeff McKee's D&RGW On3



Jim Spencer's Tennessee and Marshall Pass HO/HOn3

Randy Scott D&RGW On3
Tod Brody's garden layout G
Ron Sipkovich's Cajon Pass N
Terry Fearn D&RGW HOn3
Rick Graves Tehachapi loop HO
Slim Gauge Guild Sn3/ HO, HOn3
Tim Dickinson's Burlington Northern Washington themed layout HO



Burton Maxwell's Westside Lumber Co. HOn3
 Dick Robert's Nevada County Narrow Gauge HO



Here's the structure I entered in the contest. The model is a replica of the Northport, WA depot built by the GN in the early 1900's. The depot is a scale 30'x82' just like the prototype as well as the window, door, and detail placement is accurate. Unfortunately the prototype burned in the late 80's. Thanks to Bob Kelly, Mike Bartenstein, and Great Northern Historical Society for providing me with pictures, blueprints, and the general information.





Prototype. GNRHS collection.